killerabbit
Well-known member
- Location
- Cumbria
As you should be aware this Saturday we will be making a push to retake the east coast of Chernaus. All three stars and all three vic are on standby and will be available for the mission, that being said due to the distance the stars seem like the better choice. We have told the CDF and Chernaus government we are happy the mission can be completed successfully. This is where the news gets worse, unfortunately the Chernaus government has looked at the mission and has decided we could use some help. For what ever reason the US government has decided it needs to get involved in our fight and we are being required under our contract with the Chernaus government to work with them.
The USS Nimitz will be arriving Friday, on board is Seal Team 4, I'm guessing one of them fancy American special forces groups who constantly say Oohrah, have arms bigger than a tree trunk and can 100 miles before breakfast. Whereas we have Colshy who can't even run up a small incline without looking like he has a collapsed lung...
On to the good news, we have a new standard issue rifle; the Remington ACR-E, more specifically the short barrel CQB version, there will be a medium barrel and 6.8mm version available in the armoury.
******************************
Okay so out of RP we will be doing a joint op, however this will not be with AIs this will be our first joint op with another Milsim Community (cleared by admins obviously) so lets try and behave ourselves, so no mentioning Trump or anything like that.
Mission is THIS SATURDAY AT THE LATER TIME OF 9GMT.
If your reading this and you have never been on our Milsim before, we accept all from novice to veteran, just make sure you you have your mods downloaded beforehand.
Instructions for mod loading:
1) Go to mod collection and click Subscribe to all.
http://steamcommunity.com/sharedfiles/filedetails/?id=691690689
2) Wait for mods to download.
3) Once mods are downloaded, open the launcher.
4) Click Unload all at the top of your mods.
5) Enable RPUK Milsim Mod Loader.
6) Click Load dependencies, you may have to do this more than once.
7) Check there is not a red chainlink icon next to the mod loader mod, if there is repeat the process from step 1.
8) Download and run the TFAR plugin installer.
https://github.com/michail-nikolaev/task-force-arma-3-radio/releases/download/0.9.12/task_force_radio_3.1Compat.ts3_plugin
9) Click the install button and follow the prompts in the Teamspeak plugin installer window.
The above steps should work for most people, if they don't just ask for help in the teamspeak channel.
The USS Nimitz will be arriving Friday, on board is Seal Team 4, I'm guessing one of them fancy American special forces groups who constantly say Oohrah, have arms bigger than a tree trunk and can 100 miles before breakfast. Whereas we have Colshy who can't even run up a small incline without looking like he has a collapsed lung...
On to the good news, we have a new standard issue rifle; the Remington ACR-E, more specifically the short barrel CQB version, there will be a medium barrel and 6.8mm version available in the armoury.
******************************
Okay so out of RP we will be doing a joint op, however this will not be with AIs this will be our first joint op with another Milsim Community (cleared by admins obviously) so lets try and behave ourselves, so no mentioning Trump or anything like that.
Mission is THIS SATURDAY AT THE LATER TIME OF 9GMT.
If your reading this and you have never been on our Milsim before, we accept all from novice to veteran, just make sure you you have your mods downloaded beforehand.
Instructions for mod loading:
1) Go to mod collection and click Subscribe to all.
http://steamcommunity.com/sharedfiles/filedetails/?id=691690689
2) Wait for mods to download.
3) Once mods are downloaded, open the launcher.
4) Click Unload all at the top of your mods.
5) Enable RPUK Milsim Mod Loader.
6) Click Load dependencies, you may have to do this more than once.
7) Check there is not a red chainlink icon next to the mod loader mod, if there is repeat the process from step 1.
8) Download and run the TFAR plugin installer.
https://github.com/michail-nikolaev/task-force-arma-3-radio/releases/download/0.9.12/task_force_radio_3.1Compat.ts3_plugin
9) Click the install button and follow the prompts in the Teamspeak plugin installer window.
The above steps should work for most people, if they don't just ask for help in the teamspeak channel.
Last edited by a moderator:
, I am medic.. and it is really easy
